EX-S1 Series Dual Light Fusion Vehicle Night Vision System
Heavy construction vehicles: When used for navigation of heavy vehicles, the on-board infrared night vision system can improve the driver's perception ability when the camera relying on visual and daylight imaging fails. Clear imaging through dust and smoke to ensure the safety of pedestrians and vehicles.
|
Items |
EX-S1B |
|
Detector |
|
|
Resolution |
640×512 |
|
Pixel spacing |
12μm |
|
NETD |
≤50mK |
|
Infrared Optics |
|
|
Focal length |
13.5mm |
|
FOV |
32°×24°，±5% |
|
Visible light |
|
|
Detector type |
1/2” SONY CMOS |
|
Resolution |
1920×1080 |
|
FOV |
It is basically consistent with the infrared |
|
Minimum illumination |
Low noise 0.001lux |
|
Image |
|
|
Image display |
Black hot, white hot, red hot, green hot, iron red, amber |
|
Image adjustment |
Automatically adjust brightness and contrast |
|
Image enhancement |
Automatic |
|
Image enlargement |
2 X Electronic Amplification |
|
Image mode |
Daytime fusion, night fusion, edge fusion, infrared and visible light cycle switching |
|
System Performance |
|
|
Power-on time |
Start-up imaging stabilization time ≤ 10s. |
|
Language |
English |
|
Window heating |
Press the set temperature automatic switch, and the temperature threshold can be set. The default is to start heating when the window temperature is ≤ 2 ℃, and stop heating when the window temperature is higher than ≥ 7 ℃. |
|
Switch function |
By default, the ECU directly energizes the camera to control the camera switch. |
|
Communication function |
RS485 Dali's own protocol: brightness, gain setting, alarm sound output control, thermal imager power switch control, etc. |
|
Image output |
Frame frequency 25Hz. |
|
Early warning function |
With the function of driving detection and early warning |
|
Power supply |
|
|
Power supply input |
Rated DC24V, voltage range 9 V ~ 32 V. |
|
System power consumption |
≤ 6W (≤ 10W (during heating defrosting)) |
|
Vehicle Interface |
|
|
Power connector |
DC 24V, voltage range 9V ~ 32V. |
|
Video interface |
Analog HD AHD |
|
Communication interface |
RS485 |
|
WiFi |
Support Android/Apple APP software |
|
Structure Request |
|
|
Appearance color |
Black or aluminum color |
|
Lens protection |
High strength protective window. |
|
Environment Parameter |
|
|
Operating temperature |
-40℃~85℃ |
|
Storage temperature |
-40℃~90℃ |
|
Encapsulation |
IP69K (dual light fusion night vision camera assembly)/IP40 (night vision system controller assembly) |
|
Physics Characteristic |
|
|
Weight |
Dual-light fusion night vision camera assembly (without cable) ≤ 216 G Night vision system controller assembly (ECU) (without cable) ≤ 380 G |
|
Size |
Dual-light fusion night vision camera assembly ≤ 67.1 × 61.5 × 35.7mm (L × W × H) (rear outgoing line) Night vision system controller assembly (ECU) ≤ 152 × 101 × 27.5mm (L × W × H) |
|
Image Identification |
|
|
Detection distance |
Forward pedestrian (1.8 * 0.5m) 200 m Forward vehicle (2.3 * 2.3m) 400m |
|
Detection distance |
Forward pedestrian (1.8 * 0.5m) 90m Forward vehicle (2.3 * 2.3m) 120m |
-
UAV integrated thermal imaging camera
A powerful line of defense for urban governance
넶1162 2023-03-10 -
DALI-IRtech Electrical substation Inspection Robot
The new DALI-IRtech electrical substation inspection Robot model is equipped with a PTZ camera consisting of one thermal measuring camera and one high-resolution optical range camera. The robot is able to automatically move along a pre-programmed route, stop near electrical and other equipment subject to thermography, and aim a PTZ camera at it.
넶1538 2021-12-02
