MD16 Temperature Measurement Module
Detector Type |
Uncooled microbolometer array sensor |
Resolution |
160×120 |
Pixel Pitch |
17um |
Pixel Pitch |
17um |
Frame Rate |
≤12Hz(image and temp output at the same time) ≤14Hz(single image or temperature) |
Image Calibration |
Single point, two point, dead point replacement, etc., dynamic dead point correction, automatic gain and false color (can be turned off) are completed before leaving the factory |
Output Interface |
UVC |
Control Interface |
UVC |
Temperature Range |
30℃~40℃ |
Temperaure Accuracy |
Inbuilt black body, ±0.3°C (ambient temperature 20°C~30°C)/±0.5°C (ambient temperature 10°C~40°C) |
Temperature Measurement Range |
0.5m |
Distance Calibration |
Support |
Human Body Temperature Calibration |
Support surface temperature / human body internal temperature |
Temperature Data Output |
120×322(Image and temperature stitching up and down) 120×162(Gray value or temperature data) |
Working voltage |
DC 4.4V~5.5V |
Power consumption |
0.8W(room temperature steady state), peak 2.5W |
Working Temp |
10℃~40℃ |
Storage Temp |
-40℃~60℃ |
Dimension |
70mm×40mm×53mm |
Install port |
2 M2 threaded holes on the bottom, 1 1/4'-20UNC threaded hole, 4 M2 threaded holes on the back |
Lens |
A thermalized fixed focus infrared lens |
Focus |
f3.85mm/F1.0 |
FOV |
29.7°×38.9° |
PC Software |
Provide Windows version PC software, can view images, temperature measurement, etc. |
SDK |
Provide SDK, including data receiving, sending, parsing, output mode switching, filtering algorithm switch, automatic gain switch, pseudo-color calling and distance correction interface |