ZE1920 HD Module
◆ 50HZ full real-time imaging
◆ HDMI high-definition image output
◆ Support grayscale alarm function
◆ 1~8x continuous zoom function, no mosaic image
Items |
ZE1920 |
Detector |
|
Types |
Uncooled focal plane micro-thermal type |
Resolution |
1920×1080 |
Pixel space |
15μm |
Frame Rate |
50Hz |
Spectral Response |
8~14um |
Noise equivalent temperature difference |
≤60mK |
Image control |
|
Brightness/contrast adjustment |
Manual and automatic |
Color palette |
14 kinds of color palette and support reverse |
Digital zoom |
1~8x continuous zoom (step length 0.1) |
Non-uniformity correction |
Manual calibration, automatic calibration after power-on, timing calibration after normal work (timing time length can be set). |
Image processing |
Digital detail enhancement DDE |
Flip function |
Flip up and down, flip left and right,flip the mirror image |
Photo function |
Support SD card,bmp format |
Setting |
|
OSD menu |
Yes |
Language |
Chinese/ English |
Alarm |
|
Grayscale alarm |
Image alarm frame mark/LVTTL alarm signal/serial port alarm command (switch value) |
Alarm threshold |
Can be set |
Response time |
Alarm response time ≤0.2s. |
Lens |
|
focal length |
23mm/F1.0(64.1°×38.8°) |
45mm/F1.0(35.5°×20.4°) |
|
90mm/F1.0(18.2°×10.3°) |
|
Drive method |
Electric |
Drive interface |
1 channels, support DC6~12V DC motors. |
Electric focusing |
Continuous adjustment/step length adjustment (step length 0-32 files can be set), with rheostat interface, control command Pelco-D. |
Auto focusing |
Auto focus time ≤ 3s |
Power system |
|
External power supply |
DC12V |
Protective function |
Overvoltage, undervoltage, and reverse connection protection |
Video output |
|
Digital video interface |
HDMI,LVCMOS(16bit,BT1120) |
HD Video |
HDMI |
Control |
|
Control interface |
RS422,TTL 3.3V |
Control command |
Focus, zoom, autofocus, clear value output, electronic amplification, color scale switching, polarity switching, brightness setting, gain setting, enhancement, and other parameter setting commands. |
Interface |
|
Hardware interface |
Connectors with latches (power supply, serial port, motor control interface, etc.) |
Installation interface |
M2*0.4 screw holes, 3 sides (two on each side), optional 1/4"-20-UNC tripod adapter. |
Dimenstion |
W82×H93×D50mm (excluding lens and lens interface) |
Environment |
|
Working temp. |
-40℃~ +60℃ |
Storage temp. |
-45℃~ +70℃ |
Impact resistance |
According to GB/T15211 category II requirements |
Vibration resistance |
According to GB/T15211 category II requirements |